If you’re a teacher, then you’ve experienced schoolwork falling like autumn leaves from hallway walls. As a K-8 art teacher I was on a mission to put an end to this frustrating experience. It takes a lot of time to put together a hallway display, and I cringe at the thought of artwork getting damaged. After lots of experimentation and failure I’ve discovered two products that make hanging artwork in school hallways easier and now the work stays up for months!
There are two types of displays I hang in my school’s hallways. Some are irregular shapes that are 6 to 10 feet long. For the annual art fair I prep dozens of banners that each hold 8 to10 pieces of art. I searched high and low for the best tape and dropped ceiling hooks to mount both types of displays. What follows are descriptions of the products I’ve discovered and how to use them effectively.
The quest for the perfect tape
I searched and searched for a tape that wasn’t too expensive, would stick to smooth AND bumpy surfaces (including cinderblock!), and wouldn’t give way during a wave of humid weather. I finally found it on Amazon: it’s XFASTEN double-sided tape, a clear acrylic tape designed to adhere to rough surfaces indoors and outdoors.
I tested XFASTEN by attaching a piece of paper to a rough patch of ceiling in my classroom. After a couple weeks it was still there. It was time to put it to the test on the rough plastered walls in my school’s cafeteria. I had used Velcro to hang painted and collaged houses the students in the art club had made. I hung the artwork 10 to 12 feet high in the cafeteria which meant I had to ask maintenance to bring in a tall ladder. Boy was I mad when the art began to flutter to the floor. After testing XFASTEN I was ready to put it to work in the cafeteria. I’m happy to report that the tape is still holding six months and counting!
My only complaint about XFASTEN is that it’s difficult to peel the red vinyl backing off of the tape. I use the tip of a box cutter blade to tease a corner loose, so I can get a better grip. That said… I’d rather spend a few seconds peeling the backing off than picking up fallen artwork.
Hooks for dropped ceilings
Next I searched for dropped ceiling hooks. I settled on Outus hooks. I wasn’t sure if they’d work because I needed something to grip onto the metal strapping adjacent to the wall. Outus hooks open to grip both sides of the strapping. You can see in this photograph how I insert only one side of the hook. Even with only one side to grip the strapping these babies hang tight.
Collaborative art display
Every year, I design a large display for the hallway that includes something made by every student in the school. Last year it was monochromatic self-portraits. This year, I made three large fish with multicolored scales. At the beginning of the school year, each student drew something on a pre-printed fish scale. It was a quick and easy project, perfect for the first couple of weeks when we are practicing routines in the art room. In addition, it served as a review of concepts learned in the previous year:
I had kindergartners and 1st grade draw different kinds of lines with markers, grades 2 and 3 drew AB patterns, grade 4 made rainbows with crayons, grade 5 and 6 drew fish scale patterns and 7 and 8 shaded one side of their scale using their choice of lines (stippling, crosshatch, etc.).
Once everyone had made a scale I sorted them so there was an even distribution of color and black-and-white. I rolled out 6 feet of craft paper and painted three fish in different colors with different facial expressions. Once the paint was dry I attached the scales.
When it was time to hang the fish, I flipped them over and attached a piece of posterboard with white glue. I folded the posterboard at the top, which helped to reinforce the area. I punched two holes, where the posterboard was folded and inserted paperclips. Next, I tied fishing line to the paperclips on one end and to Outus hooks on the other. To stabilize the fish on the wall, I placed three small pieces of XFASTEN tape to the back of the fish. The displays will hang in the hallway until the end of the year and I don’t have to worry about them falling!
Art fair banners
The displays for the art fair are heavy. They are 2 to 3 feet wide by 6 to 8 feet long and hold 8 to 10 pieces of artwork. I use Scott’s double-sided tape to attach the artwork to construction paper. The banners are cut from rolls of white paper. To reinforce the top of the banner, I insert the top edge of the paper in between a folded piece of poster board with white glue. Once the glue has dried, I punch two holes, into which I put paperclips. Fishing line is tied to the paperclips and at the other end I attach the Outus hooks. I place two pieces of XFASTEN on the back of the banner, midway down. The tape helps secure the banners so they don’t move when students are milling about the hallway.
I hope my experiences and experiments help you the next time you hang a display. Share your adventures in hanging school displays in the comments below!
Pop up Art School is a mobile business that teaches over 50 art workshops a year in public libraries, afterschool enrichment and adult art workshops. If you are looking for an enjoyable and low start up cost side hustle without the ball-and-chain of a brick and mortar studio, join our Facebook group Pop up Art School-How to Run a Mobile Art Business.
The group is for sharing ideas about teaching art and other subjects in public libraries, schools and other venues. Whether you are curious or ready to start your mobile business stop by and introduce yourself!